« Back to results

Sani 24® Germicidal Disinfectant In-Service Video

Type: Video

For new hire training or yearly refresher, this in-service video covers a basic product overview, instructions for use, and disposal information for Sani-24® Germicidal Disinfectant.

Sani-24® Germicidal Disinfectantgives you the power with around-the-clock protection. It is the first, and only EPA-registered disinfectant with the ability to control HAI-causing microorganisms with Continuously Active Disinfection for up to 24 hours (1These 5 organisms are: Enterobacter aerogenes, Enterococcus faecalis VRE (Vancomycin-resistant enterococcus), Pseudomonas aeruginosa, Staphylococcus aureus, Staphylococcus aureus (Methicillin Resistant) (MRSA)).

 

> View Sani-24 Spray Product Page

Frequently Asked Questions

  • What is Continuously Active Disinfection or CAD?

    Show Answer
    Sani-24®  Germicidal Spray not only has the ability to rapidly disinfect epidemiologically important pathogens, but utilizes Continuously Active Disinfection to prevent ESKAPE responsible for ~40% of HAIs from recontaminating or recolonizing on a surface for up to 24 hours. CAD is effective against ESKAPE pathogens: ● Acinetobacter baumannii MDR Enterobacter aerogenes ● Enterobacter aerogenes MDR ● Enterococcus faecalis VRE (Vancomycin resistant enterococcus) ● New Delhi Metallo-beta-lactamase-1 (NDM-1) producing Klebsiella pneumoniae (CRE – Carbapenem resistant Enterobacteriaceae) Pseudomonas aeruginosa Staphylococcus aureus ● Staphylococcus aureus ­(Methicillin Resistant) (MRSA)  
  • What is the contact time for Sani-24® Germicidal Spray and Wipe?

    Show Answer
    The Sani-24 Wipe is effective against 27 microorganisms, including SARS-CoV-2, within a 1-minute contact time. Additional organisms are included within a 5-minute contact time; specific details listed below: Figure 1. List of Disinfection Organisms* Contact Time Sani-24 Figure 2. List of Residual Disinfection Organisms (Continuously Active Disinfection)* Upon following the directions for use for Continuously Active Disinfection, disinfection occurs within 5 minutes for certain organisms listed below following contamination events or touches for up to 24 hours post application. *The above organisms names may be abbreviated. Please refer to the Sani-24 Technical Data Bulletin for detailed list of organism reference numbers and strain information.
  • What is the shelf life for Sani-24® Germicidal Spray and Wipe?

    Show Answer
    The shelf life for the Sani-24® Wipe and Spray is 24 months or 2 years from the date of manufacture. Product can be used until the expiration date, even after being opened. Expiration date is considered the last day of the month of expiry.

@

Not recently active